Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S555 - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S555:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 24 cm³/10min ISO 1133
Temperatura 260 °C -
Carga 2.16 kg -
Contração após a moldagem, paralelo 0.6 % ISO 294-4, 2577
ASTM Dados
Índice de fluidez, MFI 21 g/10min ASTM D 1238
Temperatura 260 °C -
Carga 2.16 kg -
Contração após a moldagem, paralelo 0.006 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão no escoamento 62 MPa ISO 527
Deformação na ruptura 48 % ISO 527
Módulo de flexão, 23°C 2550 MPa ISO 178
Impacto Izod com entalhe, +23°C 44 kJ/m² ISO 180/1A
ASTM Dados
Resistência à tração no escoamento 63.4 MPa ASTM D 638
Deformação na ruptura 45 % ASTM D 638
Módulo de flexão 2550 MPa ASTM D 790
Resistência à flexão 84.1 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 640 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 91 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 105 °C ISO 75-1/-2
Flamabilidade 5V a espessura h 5VB class IEC 60695-11-20
Espessuras do tubo de teste 2.5 mm -
ASTM Dados
UL94 flamabilidade V-0 - UL 94
Espessuras do tubo de teste 1.5 mm -
DTUL @ 66 psi 107 °C ASTM D 648
DTUL @ 264 psi 93.9 °C ASTM D 648
Temperatura de amolecimento Vicat 110 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1180 kg/m³ ISO 1183
Densidade 1180 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Características especiais
Retardante de chama
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.